TMA of 1800MHz Dual-Duplexer

Description		System		model	model
				TE-2011D12/TE-2011D15	TE-2011D18/TE-2011D24
Uplink		Frequency range		1710-1785MHZ	1710-1785MHZ
		Return Loss		≤-20dB	≤-20dB
		Nominal gain		12dB/15dB	18dB/24dB
		Passband ripple		±1.0dB	±1.0dB
		Gain Variation over All Conditions		±1.0dB	±1.0dB
		Noise figure,typical		≤1.5dB	≤1.5dB
		Tx-band rejection,relative to gain level		≤-70dB	≤-70dB
		output 3rd order lntercept Point(IP3)		+26dBm	+26dBm
		Insertion loss bypass mode		≥-2.2dB	≥-2.2dB
		Return Loss,Bypass		≤-18dB	≤-18dB
		Supply voltage,fed via the RF cable		12V DC nominal@120mA(8-31 V DC)	12V DC nominal@120mA(8-31 V DC)
Downlink		Frequency range		1805-1880MHz	1805-1880MHz
		Insertion loss,typical		≥-0.6dB	≥-0.6dB
		Return Loss		≤-21dB	≤-21dB
		Rx-rejection		≤-50dB	≤-50dB
		Average operating power.max		+53dBm(200W)	+53dBm(200W)
		Intermodulation products.max		-110dBm(two 43 dBm carriers,in the Tx band)	-110dBm(two 43 dBm carriers,in the Tx band)
Miscellaneous		MTBF		>500 000h	>500 000h
		Alarm function		Two levels automatic by-pass	Two levels automatic by-pass
		EMC and safely approvals		FCC part 15,24.ETL recognized	FCC part 15,24.ETL recognized
Mechanical Data		Weight
		Volume(L*W*H)		365*181*66	365*181*66
		Dimensions		To be decided	To be decided
		Colour		Light grey,NCS 1502-R	Light grey,NCS 1502-R
		Housing		Aluminium	Aluminium
		Antenna connector(see figure)		DIN(M)(7/16)	DIN(M)(7/16)
		Receiver connector(see figure)		DIN(F)(7/17)	DIN(F)(7/17)
		Mounting kit		Plate and V-Brackets in galvanised steel	Plate and V-Brackets in galvanised steel
				(UNC1/2"or metric screws,M8)	(UNC1/2"or metric screws,M8)