Ledmate.Net
Logo
Home / Company / Products / Support / Feedback / Contact
Ledmate.Net
 
    
 
 
    
 
CDMA 450M Band Selective Repeater
Name: CDMA 450M Band Selective Repeater
Type: SIGNAL REPEATER

Characteristic
  Monitoring System Can update on lacal or Remote.
  Never selfoscillation
  To have the function which the Fiber Optical Repeater does not have
  Using the omnidirectional antenna to enlarge the coverage
  One Master can work with more Slaver
  High reliability,MTBF more than 100 thousands hours
  Perfect Remote and Local Monitoring System

Functions:

  Auto Shut-Down
  Over output Pretection
  Open door warning
  ALC Electical Level
  It is available to setup Gain and Output Electrical Level
  Display output power
  Test itself warning in main module.
  It is available to setup Operation Channel and Shifting Frequency Channle in software.
Application Areas:
  Enlarge mobile service range,cover signal in weak areas,such as:mountain,high building,Jungle etc.
  Enlarge signal strength in suburb,
  Set up the stand along the road, enhance the coverage.
  Do the coverage indoor,such as in the big building, underground,tunnel with the poor signal.

  

Power Supply are available as follwoing

Master

DC24V、DC48V、AC110V、AC220V,Battery

Slaver

DC24V、DC48V、AC110V、AC220V、Solar Cell、Wind energy,Battery

peration Ambient

Parameter

Specification

Storage Degree

-30 ~ + 55 °C

Storage Humidity

< 80%

Operation Degree

—30 ~ +55 °C

Operation Humidity

< 95%


Specification

Master:

Parameter

Specification

Uplink

Downlink

Base Coupling

Wireless Coupling

Base Coupling

Wireless Coupling

Frequency Range

A

452.5 ~ 457.5 MHz

462.5 ~ 467.5 MHz

C

450 ~ 455 MHz

460 ~ 465 MHz

Output power Max.

0dBm

33 dBm

33 dBm

33 dBm

Auto ALC Control

△f0≤2 dB

△f0≤2 dB

Gain Max.

50±3 dB

90±3 dB

50±3 dB

90±3 dB

Pass Band Flatness

≤ 3 dB

≤ 3 dB

Gain Control Range

≥30dB

≥30dB

Gain Control Step

1 dB / Step

1 dB / Step

Noise Figure

≤5 dB

≤5 dB

  

In Work band

≤-25Bm/100 kHz

Out band (Offset from Work band  edge  1MHZ

9KHz-150KHz: ≤-36dBm/1KHz

150KHz-30MHz: ≤-36dBm/10KHz

30MHz-1GHz: ≤-36dBm/100KHz

1GHz-12.75GHz: ≤-36Bm/1MHz

Intermodulation

In Work band

≤-50dBC/30KHz

≤-15dBm/30KHz

Out band (Offset from Work band  edge  1MHZ)

9KHz-1GHz:-36dBm/30KHz

1GHz-12.75GHz:-30dBm/30KHz

Wave Quality

>0.960

0.950

System Delay

<  5 ms

VSWR

<  1.4:1

I/O Impedance

50W

I/O RF Connctor

N Type(Female)

 

 

 

 

 

 

 

 

 

 


Slaver

Parameter

Specification

Uplink

Downlink

Frequency Range

A

452.5 ~ 457.5 MHz

462.5 ~ 467.5 MHz

C

450 ~ 455 MHz

460 ~ 465 MHz

Output Power Max.

2W-20W

33dBm

 

33 dBm-43 dBm

 

Gain Max.

2W-20W

90±3 dB

 

95±3 dB

 

Pass Band Flatness

≤ 3 dB

≤ 3 dB

Gain Control Range

≥30dB

≥30dB

Gain Control Step

1 dB / Step

1 dB / Step

Noise Figure

≤5 dB

≤5 dB

 

In Work band

≤-25Bm/100 kHz

Out band (Offset from Work band  edge  1MHZ

9KHz-150KHz: ≤-36dBm/1KHz

150KHz-30MHz: ≤-36dBm/10KHz

30MHz-1GHz: ≤-36dBm/100KHz

1GHz-12.75GHz: ≤-36Bm/1MHz

Intermodulation

In Work band

≤-15dBm/30KHz

≤-15dBm/30KHz

Out band (Offset from Work band  edge  1MHZ

9KHz-1GHz:-36dBm/30KHz

1GHz-12.75GHz:-30dBm/30KHz

Guard Band Rejection

Channel

Offset CDMA frequency ≥1.98MHz:
≤-38dBc
or ≤-13dBm/30KHz

Offset CDMA frequency
≥1.98MHz:
≤-44dBc
or≤-17dBm/30KHz

Wave Quality

>0.960

0.950

System Delay

< 5 ms

VSWR

< 1.4:1

I/O Impedance

50W

I/O RF Connector

N Type(Female)

 

Ledmate.Net